UNOLON HPLF << BACK

Highly Effective, Low-Foaming Pretreatment Specialty

Properties
Composition Synergistic blend of EO based surfactants.
Appearance Pale yellow clear liquid
Ionicity Non-Ionic
pH Neutral to slightly alkaline
Stability Excellent with normal pretreatment chemicals.

Salient Features

  1. Ideal for jet / soft flow machines because of very low foaming properties
  2. Exhibits excellent wetting action and detergency
  3. Stable upto 40 gpl of alkali concentration
  4. Exhibits very good dispersing and emulsifying properties
  5. Suitable for continuous scouring applications.

Methods of Application
1. Scouring of Knitted Cotton and its blends in soft flow or jet type machines
Recommended Dosage:

Properties
UNOLON HPLF 0.5-1.0 gm/lit
UNOQUEST SW-N 0.5-1.0 gm/lit
UNOQUEST SW-N : 0.5-1.0 gm/lit
UNOFLUID JL
0.5-1.0 gm/lit.
Caustic Soda 2.0-3.0 gm/lit.
Soda Ash 1.0-2.0 gm/lit.
Hydrogen Peroxide 3.0-6.0 gm/lit. (Depending upon effect desired.)
STABILIZER BBPS 0.6-1.2 gm/lit

Raise temperature to 95°C and run for 45 to 90 minutes, higher temperatures may be used if pressurized machines available, with proportionate reduction in time.

Shelf Life
Six months under normal conditions of storage with tightly closed container.

Packing
50,100,200. Kg

Technical Assistance
Only some typical modes of uses are indicated here. For detailed recipes in specific uses, please contact our Technical Services Department.